Product description
Space Saving Design
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Pneumatic Wall Mounted Keyboard Tray
Designed to make your workstation more ergonomic, this floating keyboard tray provides adjustable tilt, swivel, and height for a personalized typing experience. Built-in pneumatic spring assist makes height adjustments possible at the touch of a hand, and the locking mechanism will hold your desired setting securely in place.
Raises Keyboard Tray 12″
Smooth Pneumatic Height Adjustment
Adjusting the height of your keyboard tray couldn’t be easier with strong pneumatic lift
Comfortable Typing
The tray features tilt for ergonomic typing angles and wrist pad for added comfort.
Versatile Use
Great for offices, hospitals, workshops, and more
1 HEIGHT ADJUSTABLE
2 COMFORTABLE TYPING
3 VERSATILE USE
Locking Tilt Adjustment
Set screw for hard stop tilt adjustments to prevent sagging.
Integrated Cable Management
Route cable through and along arm for a clean appearance.
4.4lb Weight Capacity Large Keyboard Tray
Fits full sized keyboard tray and mouse.
Mounting Options Wood Stud Installation, Concrete/Brick Wall Weight Capacity 4.4 lbs Mounting Base Dimensions 6.7” x 2.8” Height Adjustment Range 12” total Keyboard Tray Dimensions 23.6” x 9.3” Maximum Extension 35” Tray Articulation +90° to -90° tilt, 180° swivel, 20° rotation
Great for Floating Workstations – Adjustable wall-mounted 23.6” x 7” keyboard tray is the perfect addition to a wall monitor mount (sold separately) to create a floating workstation for quick standing access. The tray extends a total of 33.6” from the wall, creating an easily accessible platform for your keyboard and mouse.
Pneumatic Spring Lift – The sleek keyboard tray is supported by a powerful pneumatic arm that makes adjustments smooth and simple. Easily raise or lower your keyboard surface a total of 12” for a custom setup, and lock your desired height in place when you want the tray to remain stationary.
Comfortable Typing Angles – The tray features +85° to -85° tilt and 180° swivel for flexible placement, helping you obtain the most comfortable typing position.
Easy Assembly – All hardware and instructions are provided to get your new counterbalance keyboard tray assembled in no time! The mount supports both wood stud and concrete/brick wall installation and holds up to 17.6 lbs with ease.
We’ve Got You Covered – Sturdy steel design is backed with a limited 3-year Manufacturer Warranty, as well as friendly tech support to help with any questions or concerns.
Amazon Customer –
Platform falling? Adjust this screw:
If the keyboard platform is falling/seems too heavy – you have to adjust the screw under the tray and make it stick out – I saw this reviewed a couple of times so thought I’d help
Deb in Jersey –
Excellent product!
Very sturdy and works exactly as advertised. Installation was as expected. Can be tricky for a newbie (still doable, though) but not for anyone with experience. I actually attached it to my headboard to use as a bedside table. I love it.
Cheryl Krhovjak –
Stopped working
I loved this keyboard tray when I first got it, fairly easy to install and so convenient with the pneumatic arm. Since the tray is basically floating there is a lot of give as you type. The one star rating is because after just two weeks, the pneumatic arm stopped working and the whole joint locked up. Really disappointed.
AJ –
It’s OK but has issues…
It seems to be made well, and the installation was not bad, but the keyboard and mouse slip off the tray with the slightest angle. I had to fashion a lip at the bottom to keep that from happening. (I put on two drawer handles at the bottom to hold with Velcro to hold the mouse and keyboard up…see photo. I would have expected more for the price I paid for this.
Amazon Customer –
Good product, not perfect
There is a “lean” at the joints that can make the tray surface slightly tilt when stretched at certain angles. The tray will end up not being perfectly level, but overall works.Otherwise relatively easy to assemble, and sturdy. Also not quite deep enough to fully support large keyboards but still holds them up.
Amazon Customer –
Great Quality
I was surprised that it is strong enough to work on, I don’t know why I was expecting it to be flimsy, but it is really well built.
Amazon Customer –
Muy buena calidad lo recomiendo
Ya hace más de un año creo de este producto y está genial es en mi bodega se usa modo industrial y súper bien
Chuff –
The Keyboard Tray Doesn’t Stay in Place
This product is sturdy but the keyboard tray doesn’t stay in place. The product documentation states that the tray can be positioned at different angles. As soon as you type, the tray is angled downward, and the mouse ends up falling. I’ve tightened the nuts and still experienced the same issue.
Geoff Radons –
My original for this tray had something happen to it in transit so I never received it and I had to reorder. I think that was the god of fate trying to tell me something and I was too damn deaf to listen.The tray is very narrow and really only suitable for a simple small keyboard that isn’t very deep at all. If you have anything deeper than a generic small format then you’re going to have over hang everywhere.Its a wall mount keyboard tray that is expected to hold a mouse too. As most people know, you generally have your keyboard slightly tilted towards you even when standing. That would usually mean that you’d place a lip on the tray along the front edge closest to the user so that when the keyboard is tilted towards you it doesn’t fall off the tray into your lap or the mouse doesn’t go for a roll around on the floor. These bozos put the lip on the back side furthest away from the user. Why?!This gives you two options:#1 You use the lip along the top as a means to hook your keyboard so it doesn’t slip off the tray and that gives you some tilt but make the keyboard somewhat unstable or…#2 You have it sitting flat on the tray with an over hang along the front that makes it more prone to falling off as you try to keep the tray as level as possible.In addition, the lack of a front edge lip also means that you play pick up with your mouse every few minutes as it slowly slides off the tray. Even when you think you’ve made the tray level, as you type the tray flexes downward and the mouse creeps towards the edge leaping off presumably looking for a better home. I guess you could use one of those trackball mice that sit stationary as you roll the trackball around with your thumb, but should I really be forced to go buy a new mouse for a tray that should have reversed the lip in the first place?I really think you can do better than buying this.Its a very poor design and could have been fixed early in production if someone had simply decided to try the thing out in real life.
Gabriel Jientara Bini –
Seria um suporte muito bom, mas a partir do momento que vc o alonga, ele é totalmente mole e pende para os lados, muitas vezes derrubando o teclado
BeralaBoy –
Solid, sturdy and excellent quality.
XsiTec –
Zuersteinmal sei gesagt, das der Arm sehr gut aussieht und die Verarbeitung eigentlich auch sehr gut ist. Er lässt sich leicht und eigentlich sogar ohne die nur in Englisch beigelegte Montageanleitung montieren. Auch die Verstellbarkeit ist vollkommen ausreichend umgesetzt, so dass man ihn sowohl im Sitzen als auch im Stehen gut verwenden und auch bei etwas Platzmangel oder unterschiedlichen Entfernungen vom Monitor montieren und verwenden kann.Soweit zu den positiven Punkten.Was aber gleich beim ersten Gebrauch negativ auffällt ist, dass man den Arm nicht wirklich belasten kann. D.h. eine Auflage der Hände auf der Halteplatte oder der bei manchen Tastaturen dafür vorgesehenen Auflage kann man knicken. Der Arm gibt in diesem Fall einfach zu schnell nach wodurch eine stabile und ablenkungsfreie Arbeitsweise nicht gegeben ist.Ich hab dann auch mal das Gewicht meiner Handauflage mit einer Wage gemessen und lag dabei so zwischen 5 und 8 kg.Laut der Abbildung sollte die Halterung bis zu 8kg (17,6 lbs) tragen ….. naja, tragen tut sie es ja aber stabil ist dann doch was anderes.Das nächste ist die Tastatur und Mausablage ….Was soll ich sagen, wer hatte eigentlich die Idee auf der Unterseite die Biegung nach unten auszuführe ? Schräg stellen ist damit schon mal raus auch wenn für die Tastatur witzigerweise Greb-Pads mit dabei liegen – was für die Maus natürlich ausfällt außer man verwendet vielleicht eine mit Trackball, dann wäre das noch gerade OK so denke ich. Aber dann kommen wir zur Fixierung der Neigung der Ablage – diese ist kurz gesagt nicht vorhanden. Man kann zwar über eine Madenschraube die max. Neigung nach unten begrenzen, ohne das wäre die Halterung auch komplett raus, aber wenn man die Neigung dann nach oben ändert, dann klappt sie schon durch etwas Belastung wieder zurück auf die Madenschraube. Komisch ist auch, dass sie sich nach oben schwerer verstellen lässt als nach unten was ja eigentlich umgekehrt sein sollte …. Ich habe es natürlich mehrfach geprüft aber nichts gefunden durch das man dieses Verhalten ändern könnte.Schade, wäre eigentlich die perfekte Lösung für meinen Anwendungsfall gewesen und ich hatte mir von einer VIVO Lösung, zu diesem Preis, auch mehr versprochen. Daher auch noch ein Stern weniger.Zusammenfassen kann ich diesen Artikel also so bewerten :Gut gedacht um umgesetzt aber zu schwach ausgeführt und deshalb nur sehr bedingt verwendbar.
Pedjy –
J’ai pu fixer ce support sur le côté de mon profilé de Sim Racing afin d’avoir le clavier à ma portée. Bouge un peu quand il est détendu mais ce n’est pas fait pour taper un roman. Pour mon emploi en Sim Racing cela convient très bien.