From the brand
YOLENY is known for its consistent innovation, top quality, and great designs. We specialize in making the best outdoor furniture made just for you.
At YOLENY, we aim to create incredible and professionally made products to satisfy the needs of your everyday life.
YOLENY Polycarbonate Gazebo
YOLENY Steel Gazebo
YOLENY Gazebo with Gutter
YOLENY Heavy Size Gazebo
Additional Products——Sunroom
GALVANIZED STEEL DOUBLE ROOF: This patio gazebo has a double-layer galvanized steel roof that offers great ventilation and airflow. Its sturdy construction provides protection against wind, rain, and snow, while the galvanized steel material ensures thermal insulation, waterproofing, and noise reduction.
ALUMINUM FRAME: Sturdy permanent hardtop gazebo built with triangular powder-coated aluminum frames, which are more stable and durable than the standard. The 10×12 gazebo with pre-drilled bases is designed for various kinds of ground and can be installed in different outdoor situations.
HUMANIZED DESIGN: Fully enclosed zippered double layer sidewall protects you from direct sunlight. We designed a dual rail system for it, you can easily open it or put it away. YOLENY gazebo is equipped with 3 hooks. Each post with pre-drilled panels can be easily attached to any type of floor.
SLOPE & LEAKAGE HOLE: The sloping roof facilitates the smooth flow of rainwater and snow from its leaking holes to the ground, preventing accumulation and water seepage that could cause damage. This ensures that the area below remains undisturbed, making it ideal for outdoor gatherings, even during rainy or snowy weather.
STYLISH & FUNCTIONAL: This hardtop gazebo comes in 2 boxes with standardized instructions and necessary hardware. The pergola measures 12′ L X 10′ W x 9.5′ H when fully assembled, covering 120 square feet, providing a pleasant outdoor life experience for your family and friends. We have provided detailed instructions and strongly recommend that 2~3 people spend 2~4 hours to install this gazebo.
ryan hart –
Great Quality and Style
Shipping:FedEx tracking only showed a single number. Only 2 of 4 boxes arrived. Contacted seller who responded within 24 hours with the remaining 2 tracking numbers. This was not a fault of the seller, but FedEx who was understaffed at the time. All 4 boxes were received within 4 days.Assembly:I found it rather easy, but have assembled MANY of these flat pack-type products. I would say it took around 3 hours. Help is needed to raise the roof while preventing unneeded stress on the legs. I had one person which worked, but 3 would be ideal. Securing the roof panels REQUIRES more than one person as any bolt not right on the edge would be impossible to install. Someone needs to insert roof spacers and hold the nut while someone drives the bolt. Instructions were word-less but easy to follow. All parts were there with added hardware where you would expect to see it.Quality:Purchased in order to leave up in a New York winter. While it has not seen one yet, i am not worried about its ability to hold a moderate snow load and take heavy wind. The cross braces that hold the legs to the roof are surprisingly sturdy for a flat pack product like this. The coating on the entire thing has a great finish and seems really thick. As in some other reviews, i agree some parts can seem flimsy when on their own, but the finished product is plenty sturdy.UPDATE >> One winter season behind us. This handled snow loads of just under a foot with no issue, but not to say you should not keep it clear (would handle heavy winds better with no snow load). We did have a full day storm with wind gusts of up to 60 miles per hour and it is not rated for that. It is tapconned in and still standing. We do bunch up the curtains into the top corners under the roof and bungie them there to reduce anything the wind could get a hold of (in the winter season and if we know a wind storm is eminent).Mounting:It came with concrete expansion anchors that seemed a little weak, but this is not the reason i opted to NOT use them. There are no “foot” caps. So whatever you use to mount it can be seen. Some have a cap you can put on before building and lower it over after mounting. their mounts use a lock and normal washer and a bolt that even if you cut remaining thread off seems like a toe’s worst nightmare if barefoot and kicked it. I opted for 2.5 in x 1/4 tapcon, hex top. It has a low profile and holds more than it needs to.
Ken talovich –
Very nice Gazebo
We were going to build a wood gazebo but given the cost of lumber these days, going with a pre-made unit made sense cost wise and time/effort to install. I looked at a lot of different ones and ended up going with the Yoleny based on the reviews here on Amazon.Was a bit concerned with the manpower requirement (3people) and the picture only instructions to assemble this unit, but it turned out to be a non issue. My wife and I were able to put this together in two evenings of work and a few adult beverages and not requiring any help from others.The gazebo arrived over several days in 4 large boxes, 3 for the frame and 1 for the roof panels. The frame boxes are long but not that heavy, for the roof panels we had to open the box in the front of the house and carry the large panels to the backyard individually as the box was too heavy for us to carry in one trip.The instructions looked a bit lacking at first, but it ended up being a non issue for us. The best advice I can give, is to do a full inventory and lay out all the parts first. This really helps with knowing what all the parts look like so you can match them up with the illustrations. The long boxes have all the parts for the frame, so you could start once you have those as roof panels go on last.Only tools needed are a good Allen wrench, as the one provided in the kit is crap. To make things go a bit quicker I also used an electric screwdriver with both Philips and Allen bits. When assembling leave most of the screws loose to help fit things together, then go back and tighten things up once the frame is together. The roof panels are the biggest challenge as you are working on a ladder and the larger roof panels are awkward and take some tweaking to get all the holes to align, but not that bad really.This unit is well designed and looks pretty strong, but definitely needs to be anchored down. We installed ours on a concrete slab near our pool and I drilled holes in the concrete with my hammer drill and used screw in anchors from Lowes.Overall its a solid, good quality nice looking unit which should hold up for years