VIVO Dual Monitor Desk Mount, Holds 2 Computer Screens up to 30 inches and 22lbs Each, Heavy Duty Fully Adjustable Steel Stand with C-Clamp and Grommet, Black, STAND-V002

10/10!
Easy to install by myself. Sturdy and stable even when adjusting monitor angles. No missing or damaged pieces. It’s great that it comes with spacers for monitors that need it—one of mine did and it turned out perfect. The adjustable arms can be tightened to lock your monitors in place, or you can leave the screws slightly loosened for better flexibility. Excellent product over all! I’m happy that I have more space on my desk now and everything looks neater.

Almost perfect for 2 24″ Dell P2415Q monitors.
Stand is great overall. Since my desk is built-in, I could not use the clamp (I knew this beforehand) and instead drilled a 3/8″ hole in the desk, and used this mounting method. Very sturdy, and works great. Lots of adjustments, and should be great for most uses. They also supply all the parts you need for the two mounting options (clamp and through desk), and mounting was quick and easy.I’m using this with 2 Dell P2415Q monitors (highly recommended). Two slight issues in my case:1. Due to the Dell VESA mount points being recessed (as well the the “quick release button” button used for the Dell stand right below these mount points), putting the provided bracket on the back of these monitors using the provided thumbscrews (without the spacers) will not allow you to slide the monitor with bracket onto the standard of the arm, as it won’t clear the side of the monitor nor the “quick release button”. However, using the provided spacers (which requires using the provided longer screws) also is problematic as now the screws are too long for the Dell bracket (even with the spacers) and can’t be tightened down enough to secure the bracket to the monitor.I solved this issue by using some faucet washers I found in the garage which were PERFECT for the job. They allow the bracket to stand out just enough from the back of the monitor to slide in the bracket, you can still use the shorter thumb screws, and this has the monitor mounted closer than the provided spacers would otherwise (a plus for me as I have a narrow 18″ built in desk – see next point).The washers I used (which I already had) are Danco 88570 “0 Flat Faucet Washers, 17/32″ O.D.” and come in 10 per package (I used 8). Believe I got them from Lowe’s (or perhaps Home Depot). They are fairly thin, but just the perfect width. I have recommended Vivo to include some similar sized spacers in order to accommodate Dell and other like monitors.2. The 2nd issue I ran into is related to my narrow 18″ built in desk. Since its so narrow, I’d like to have the monitors as close to the wall as possible. I also would like to have the monitors almost touching each other. Doing so, requires bending the back arms in such a way that they’re touching the wall. Since the wall is in the way, I have to angle the monitors and pull them out a bit to do this (make them touch). This is most likely as they are 24″ monitors. WIth 27″, I’d imagine it would work better as they’d use that extra space. In my case I either have to put up with the monitors not touching (being up to 5″ apart), or angled and pulled out from the wall. This is not a knock on the product, but more related to my installation. Were I to be able to have installed the mount further from the wall (from center of post, its about 3″, as close as I could mount it), I may not have had the issue.I’ve recommended that Vivo either include, or make available for additional purchase, two slightly smaller arms (by 2-3″) that could be used for those with a situation such as myself.Also I would like to note that I managed to alleviate this problem SOMEWHAT (saving about 2″) by removing the arms and swapping them. While both arms are about the same lenght, one has a bracket that adds about another inch. By swapping them, they can be positioned so that you can regain a bit of this space.But overall, I think the bracket is superb! With the addition of smaller spacers, and the availability (even for additional purchase) of slightly smaller arms for those with 24″ monitors, this would be perfect.

This desk mount is a rock-solid solution for anyone looking to upgrade their workspace. The heavy-duty steel build feels incredibly sturdy, easily supporting two monitors up to 30 inches without wobble or sag. Setup is straightforward with the included C-clamp and grommet options, fitting securely on most desks. Once installed, the fully adjustable arms move smoothly, letting you tilt, swivel, and rotate your screens to the perfect ergonomic position. Cable management clips help keep everything tidy, giving your desk a clean, professional look. Durable, flexible, and reliable — this mount instantly makes your setup more organized, comfortable, and productivity-ready.

Excelente soporte para dos monitores. Vale cada peso que pagas por él.Si bien no es económico, el precio lo desquita en lo que lo utilizas. Llevo como 6 meses con el soporte, al principio cambiaba diario la orientación de uno de los monitores, pero al final no era necesario. Aún así, nunca se ha aflojado, ni ha presentado señas de que se baje alguno de los monitores, o se sienta que están frágiles. Al contrario, vienen con fierros muy bien hechos y de buena calidad, sin duda los recomendaría sin pensarlo, un impresindible si necesitas trabajar o hacer stream con dos monitores (como en mi caso). Te va a ayudar a ser más productivo, eficiente y a tener tu lugar de trabajo más ordenado y pulcro.Venían con un círculo de metal que la verdad no supe para que era, pero no fue necesario instalarlo.