Prepac Simply Modern Nightstand Bedside Table, Natural Oak Nightstand for Bedroom, End Table with 3 Drawers 26.5″ W x 26.75″ H x 16″ D

Great dresser, once you sort out the hardware
It takes me awhile to pull the trigger on purchases here and I am glad I took the plunge on Simply Modern. Some thoughts:Good5 warranty on parts, unexpectedFoam used in packing was wrapped, no trail of Styrofoam.The furniture pieces, while not uniformly marked, were easy to identify based on shape. Heads up, the drawer sides are marked left and right.Not so goodThe bags of nuts, cams, nails, etc were jumbled and unlabeled.I needed to use more than 1 bit on my screwdriver. If I need more than 1, I expect to be told.The back was a disappointment. I hate when the back is attached by nails. It’s a sturdy piece but would have been better with a more substantial material.I know I sound really negative but I gave the dresser 5 stars because it is a great value. I was able to assemble the unit by myself in a reasonable amount of time, with experience and a good screwdriver set. The drawers are deep and the sides are real wood.

Sleek and Modern, but Label the Pieces Please!
The Prepac Simply Modern Nightstand has a beautiful, clean, and minimalistic design that fits perfectly with my room’s style. The quality feels solid and sturdy, and once put together, it looks like a much more expensive piece of furniture.Assembly was pretty straightforward, but it was a little annoying that none of the pieces were labeled. It made me spend extra time double-checking which part was which. Once I figured that out, the process went smoothly and didn’t require any special tools or skills.Overall, I’m very happy with the finished product. it’s sleek, modern, and functional. Just wish Prepac would label the parts to make the assembly even easier.

Looks nice, no damage, nice size for extra clothes storage
Product came well packaged with no damage, which is always a concern with this type of furnitature. Takes approximately 1.5 hours to put 1 unit together. Instructions are pictures only but it is prety easy to figure out. This product is 100% partical board, with only drawer sides being pine boards. Color is a deep choclate brown and looks nice. Parts went together well using the cam system and dowels. I am a perfectionist so I used wood glue on all partical board to partical board joints or wood joints as you can not crank down too hard on these cams or your will break the partical board. This makes it way stronger and a much better end product. I think the peices could come apart if you move it around so gluing is recommended. Mine woun’t come apart now! Drawer slides work very nice being metal and they are sturdy if you glue as I did and open and close great. This is a good size to a taller bed at 29 inches tall. For my sons appartment or a spare room these look nice enough. Also comes with brown marker to touch up and scratches. I bought the dresser as well but havent put together yet but expect it to be the same. These are heavy like all partical board so ladie might need some help. You need to use coasters or protect top from wet glasses so finish does not bubble up. For the price I think its worth it, for the right room.

Well made dresser! Love it!
This is such a cute dresser! I thought it was going to be a cheap, flimsy one, but it’s actually good quality. It was packaged very well! It did come with a bunch of pieces which was overwhelming at first, but the instructions were very easy to follow and the parts were color coded. Took me about an hour to put together. Very happy with my purchase!

I bought two of these night tables and was pleasantly surprised especially for the price! They are MDF but it is thick and solid. It took about 2.5 hours to put them both together but the directions were well done and concise. Be advised you will need tools that aren’t included to assemble- a Philips head screw driver and hammer. Lots of screws and cam locks but the end result is sturdy and attractive. I’m a bit concerned that it comes with a marker to fix scratches, I assume it will probably scratch easily but I’m planning to protect the tops with silicone mats to avoid that and any water damage. I would recommend these as an affordable piece of furniture

A good purchase however you get the quality you pay for. The unit looks good and is sturdy, with metal slides and rollers on the nightstand and each drawer. The pictures are an accurate representation. I purchased two units and am very handy with mechanical things, but I offer the following observations and suggestions that may be helpful for deciding on whether or not to purchase or to make your assembly easier:1) This nightstand is essentially all MDF with virtually no solid wood. The back of the unit and drawer bases are cardboard. The finish is a “foil” similar to many IKEA products rather than wood veneer.2) It took me 2 hours to assemble the first unit I purchased, and 1.5 hours for the second unit, going pretty steady without any breaks. There are many small pieces of varying sizes and functions, and great attention is needed for correct orientation of pieces. The manual is not explicit on some critical elements of sizing and orientation for many pieces. If you are a type of person who gets frustrated with complicated IKEA-type assembly projects or don’t consider yourself handy, you probably won’t like this project.3) There are many hidden “zinc cams” that serve to provide the mechanical joins on metal dowels screwed into the MDF board. Note that 24 of these cams are all thrown into a bag and appear to be all about the same size. Unless you really pay attention to the fact that some are large and some are a bit smaller, it’s easy to use a smaller cam to make a join when a larger cam is essential. Drawers take ONLY the smaller cams, and drawers do not take larger cams, so if you make a mistake, you will need to disassemble pieces of this unit you’ve already assembled to ensure proper completion. Step 3 of the instructions (interior bracing boards) do not specify the size of cams: only use the larger cams at this point.4) Cabinet slides and drawer glides for the nightstand utilize a very specific orientation to work correctly (not explicitly noted in the instructions). Cabinet slides need to be oriented so that when the unit is finished and ready to accept the drawers, the drawer glide rollers can drop into the slides through an indentation on the cabinet slide. This is a subtle feature of the cabinet slides, and I made the error my first time of installing all the cabinet slides “upside down,” which prevented the drawers from being inserted correctly.5) One thing the instructions don’t indicate is that the drawer slides are stamped DL and DR (Drawer Left, Drawer Right), and it helps with their proper installation to note this when you are pairing with wooden drawer sides (which are stamped L and R on their ends).I’ve attached some pictures of the correct orientation of the cabinet glides and drawer slides in the assembled unit.I consider these units to be disposable: they have been purchased for use within a nursing home and I don’t expect more than a limited life for perhaps several years. Nevertheless, I still consider them to be a good buy for my purposes. Similar products preassembled and using all wood with better finishing are approximately three times the price.

I was skeptical about ordering but this turned out GREAT! The quality is really good, it’s sturdy and spacious, good value for money, good in size & height as well. I’d recommend this nightstand to anyone looking to upgrade their room!